Recording

The R-122 MKII can handle SPLs of up to 135db, which is really loud! At high levels, care must be taken in placement – a 45 degree angle is helpful. Also, mic pre overload becomes a possibility, due to the high output of the R-122 MKII’s active circuitry (see When I use my R-122 MKII

The R-122 MKII is a high output microphone. When used on loud sources, the possibility exists of overloading the input of your microphone preamp. An easy fix is to use an inline attenuator between the mic and the input of the mic pre. Inline attenuators, such as those made by Switchcraft, AudioTechnica, Shure and ProCo,

Phantom power is actually required for operation of the R-122 and will not damage it in any way. For more information visit Ribbon Mics and Phantom Power. Did this answer your question?Yes   NoAdditional CommentsSend Feedback

Yes R-121’s and R-122’s are great on drums. The R-121 is highly recommended for kick, toms, room mics, high-hat and ride cymbals. It’s good for snare as well, but care must be taken to place it where it won’t be hit. For kick use, angle the mic at approximately 45 degrees. Depending on placement, a